Promo
(.224 member)
03/10/19 11:58 PM
Re: A. Mulacz Break Barrel with Paradox rifling

Hello Tinker,

first of all, thanks for the welcome! It is very tough to take pictures of chamber and inside of the bore. I've made two quick trials with my mobile phone which are shown in the picture below. Note the paradox rifling seems to be deeper at the top, whereas they are virtually none-existant at bottom (you can also feel it when you put your finger into the bore). It looks as it wasn't a rifling but more a kind of cuts done to the barrel at the muzzle.

I can of course provide better pictures of the sights, if you would let me know what in particular you want to see.

Re dimensions: the chamber has a diameter of 22.52mm (including the rim) whereas the diameter without the rim is 21.13mm and the cutout for the rim is 1.53mm deep. There is no real "headspace", since it doesn't have a clear cut at the front of the chamber. Therefore it is very tough to provide chamber dimensions.
Worth mentioning in this context: the rim of a modern 10/89 cartridge is too large for the chamber in this rifle.


Hello John,

yes, I've been waiting to get additional information on my rifle. And when you finally approved my account I was in front of the computer doing something else. So it was to the right point of time as well. I don't think it would had been made for Eastern Europe since the rifle obviously never had left the country.






Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved