I will be going to the range today and try some of the loads that I have been using whitch are SR7625 at 34.5 grains with a shot cup that has been cut down with .748 balls. This time I took care to get the fingers cut at the same hight to hold the ball centered. I also loaded some .690 balls in the same shot cup as they fit just right inside the cup and all I have to do is cut the fingers at the top of the ball. I know that these are small for a 10 gauge but its what I have on hand and with the way that they fit in the shot cup they may be the best for shooting. I also have on order some .760 balls they should be here sometime this week along with a spin doctor for preping the hull mounth and a roll crimper to try to get a better crimps on the balls. Does anyone know if they make .690 slugs that can be ordered as these would also fit inside the shot cup and would be heaver then the balls. I also have on order some Fed. 13/4 oz. slug loads as I would like to try them. I doin't think that will shoot to the same point of aim but they are worth a try. will let ya all know how it all works out.

Tom N