Went to the range today and shot my .72 I will have to get the muzzle done or do it myself as I berued my plam trying to load with .715 and a .10 thou. patch I also will be trying some .710 and .15 patches mabe that will work. The right barrel is about 3 to 4 inckes high and the left is crossing to the right about 3 to 31/2 inches. this with a 715 ball and .10 patch. I could only find two or three of them and they didn't look all that good. I think that they are being cut on loading. they are very tight all the way down. Each barrel is shooting good but not together at all. How dose one load to uncross or cross the barrels? load was 90 grains of 2f black and above ball and patch. Oh the left barrel is right on highth. but to the right.

Thanks TomN