CJF
(.333 member)
24/02/22 01:14 PM
Re: Feedback on 1910 factory Mauser sporter

I tried the recommendation from folks at the DoubleGun BBS to use raw linseed oil, rags and a tooth brush to clean the stock. About 30 minutes of care eliminated the matt mottled spots on the stock and brought out the tiger stripe. Very happy with this rifle.

This first pics shows the stock before a oil:


Here's after some oil and rubbing...I suspect more oil and friction would continue to clean the stock. The checkering is better after, but no where near as good as the pics shared under the stock cleaning thread.



Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved