metal
(.275 member)
24/05/18 02:48 PM
Re: Fraser bolt handle

Not too hard to do. They would have held it in a jig then silver brazed it and then pinned it, possibly followed by more silver braze flowed in around the pin. Thats how I would do it anyway. The main thing is to control the considerable amount of heat required so as to not soften / anneal the rear of the bolt, but considering it is a cock on closing action then it’s no so critical. Although rehardening is easily done, there are ways to avoid the need to do it.


Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved