| GSP7 |
| (.275 member) |
| 06/09/08 08:15 AM |
Re: CZ550 Controlled Feed: Oh Really?
|
Quote:
Fellas, take a look at Hoppdoc's previous pic showing his bolt.
Here's mine, showing the angled cut at the bottom that prevents the rim from being secured before the case leaves the magazine.
Thanks very much, Hoppdoc, for posting your .505 bolt pic previously.
Here is the bolt from my CZ550, 6.5x55.
That angle cut on your extractor is extreme. None of my several m98 are ground like that. Do you have other m98s to compare too?
I do have one extractor that is bad that I need to replace because the whole claw is ground to short kinda like yours and the case pops out sometimes
Also, I dont know if this hads been mentioned or aware, A mauser 98 extractor and bolt has what Ill call a 1/2 dovetail angle in the grove at the head of the bolt and on the extractor that it rides in. Ruger and CZ(I think also) dont have that feature so the claw head can flex outward and snap over the case head when used like a pushfeed