So let's see if this works.

Edit. It did not work. For some reason, the photos are showing up full size, and not at the 25% size I had thought I'd set them too. Also, the first photo worked, the other two did not. So I will just post the links until I figure out what I am doing wrong!

First is the action. This is the only side that has any stamp marks, and as you can see no proof. I thought it would not leave the Austro-Hungarian Empire without them?

http://www.saintpanzer.com/photos/wp-content/uploads/2019/07/M1910-Action-1.jpg

Note also the 3 digit serial number. Same number under the bolt handle, and stamped inside the stock.

Here is the diopter sight. I haven't decided if I like it yet. My [older] eyes do need the help, but if you work the action while still snapped in, it gets danger close to your eye. Oh, and I thought you'd never ask, it has a 14.5 inch (about 365mm) length of pull. I would actually prefer that to be cut down to a 13.5 inch, but then, with the diopter down, you'd definitely poke yourself in the eye. But I'm not sure I'd like to try running boar with the diopter up.

http://www.saintpanzer.com/photos/wp-content/uploads/2019/07/Diopter.jpeg

And here is that pesky little setscrew you need to remove in order to field strip the bolt.

http://www.saintpanzer.com/photos/wp-content/uploads/2019/07/Setscrew.jpeg