ChrisPer
(.300 member)
29/01/09 07:35 PM
Re: Crackers for the 9.5

Mine is a rifle. You can see a couple of brass dots in the stock. These are from a repair by Walter Roth in Harare, as the stock had a fine split inside he squeezed epoxy into the crack and braced it wiht th ebrass screws, then ground them flush. The target was offhand at 25m, I was quite pleased with the results as I tried 3 different sight pictures 2 shots each. The expanded projie is a Hornady and it stopped in wet sand.

Oh, the filthy case necks come from trying some Westcastings coated 220gn cast bullets. They squirted out before the neck expanded, giving a faceful of gas and black case necks. I tried faster and faster powders and fillers but it was no good and I stopped using the cast bullets. Hence my interest in crimp dies - for another try!





Left: Woodleigh 270gn bought about 2003, centre Kynoch, right Hornady 270gn bought about 2004.






Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved