Rolland
(.333 member)
18/03/13 03:59 PM
Re: Building a Lee Speed-ish Rifle - Help Please?

Nailcreek

Here are a couple of guns I have built on the Lee Enfield. They were built from rifles that had been "sporterized" by someone with a hammer and dremel tool. I used the action on the bottom one, its a 45-70 now and the top is a .303 with original barrel. Boyds stocks. I reshaped the magazine on the .303 to five rounds both have the charging bridge removed and holes tig welded closed. I could not find a rear sight for the .303 so I used a Williams peep sight. The 45-70 magazine is an old Navy Arms I found.


I left the cut-off on the .303 this is one of the most accurate rifles I own, both rifles had the butt stock and forearm glass bedded as I had slimmed them down enough fit well but not sure if it was strong enough.



Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved