TH44
(.375 member)
22/01/23 08:35 AM
Purdey .360 DR

Hi Guys, Bought this before Christmas at a good price










Usual 3 leaf backsight

Put a .360 case in it, dropped down 1/2"
Tried other .360s only one that fitted was the 400/360 2 3/4", so I thought it was an early version of that - so cut it down and fitted a bullet from the mould

Old mould came with it
First Problem, a 4.5mm hole drilled in the bottom so it could not be used!!

cut a 4.5mm drill off to plug hole and cast 10 bullets with difficulty

Now have 2 cartridges as display

Something was not right so I did what I should have done first, took a chamber cast

Oh dear !! in the past, someone had drilled/reamed the chambers so they wold not take a cartridge GRRRR

Thsi must have been done years ago in the UK when there was no exemption for early cartridge arms which would have had to be put on a Firearms certificate, also the reason for drilling the mould

Anyway, I have my first Purdey, in a nice little calibre but the damage/desecration takes the edge off it

Bonhams sold it as an antique not to be fired

Comments welcome but I am aware of the poor gun legislation in this country but I cannot change that

TH





Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved