You are absolutely right! In fact on the bottom target they are already crossing, at 50 yds! If you will look at the lables for each shot, the 50 yd target is crossing slightly, and will get worse as the range increases. This one needs slowing down just a little. That and the sights are the fix for this one for sure. The top target shows a proper regulation with the left barrel printing on the left, and the right barrel printing on the right, but close enough to make a tight composit group. This is perfect load for the regulation, so I'd adjust the elevation with a taller front sight, or file the back down, to get the elevation on! Both rifles are shooting very well for individule barrel group. If the tiny adjustment is done on the load for the bottom target, and the sights adjusted for both for elevation , you've got a pair of winners there!