Daryl S:

Today, I removed the primer decapping rod from the sizer die and resized the cases. I used a fired case with a neck diameter of .368"

Since there is no sizer ball, I am getting the amount of swaging the neck is getting before it gets resized by the expander ball.

My case necks were compressed to .353" diameter .

I then screwed the deprimer rod and expander ball back into the die and expanded the neck.

The case neck was expanded to .362" diameter.

I am thinking that .009" resizing of the neck everytime I resize my case is excessive. Would the other 9.3 reloaders try this little test and let me now what you get.

Prewar 47:

I measured a friends 9.3 dies and he had .3635 as well.

Kind regards,

Carpediem