Antlers
(.275 member)
06/07/10 06:23 AM
Re: British Rear Blades

Quote:

I suspect the real reason for the wide V with no flat top is for optional use of a moon sight. Because the moon sight is so much bigger, the flat-topped version could leave the bead sicking out the top.

With ordinary U or V tangent sights, I was taught to align the top of the bead or post with the flat top of the rear sight. You can't do that with a wide pointy-top express sight, so most seem set up to require a 'fine bead' alignment. This works OK on the first shot or the range, but I've heard a couple of professional hunters say clients often shoot high on the second shot - maybe they forget to pull the bead right down into the V in the excitement, esp. when there's no low flat top to remind them to keep it down.

This is not a problem likely to occur with a peep sight, of course.




That's an interesting theory about the moon sight Paul. It might make sense of something I noticed when going thru all the archives. It was not uncommon to see the wide V on the first blade, but flat topped sharp V blades for the folding blades - I couldn't figure why that was done.

Mouse, I think you may have hit upon the answer, though it makes my decision more difficult. I had hoped that others had dealt with the same question and would pipe in. Thx.



Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved