Sneaking in more work here and there. My Sporting Classics knives are keeping me plenty busy.

I have the ejectors working smoothly, and have been working on the trigger group. First pic is of the raw bar I will make the main spring stops from, along with the trigger group.

Here, with the stops drilled and installed with the hammers at rest, and next with the hammers cocked. I actually need to remake one ofthe hammers as the left hammer sits a few degrees forward of the right hammer. The right hammer is is perfect, and the only way to make them match is to remove more material from the sear notch to let it move forward to the left hammers position. That would be a bone headed thing to do, so I will make a new hammer...

Here we have the stops rough ground so the trigger group will fit into the action.

Next step is to install the cocking feet and cocking rods so the action will....cock of course. After that, it will be time to chamber it and get her regulated.