OK, Here is an update....Please forgive the drop in quality of the pics. I am using an older camera until my good one shows up.

This is a shot of the bottom of the shoe lump/barrels. I've been fitting the ejectors and retainers. The ejector system I am using is similar to what would typicaly be on an O/U. Your basic coil spring ejector set up.

I've also been making and fitting the lock parts. I try to make mechanisms as simple as possible, which means as few parts as I can whittle down to. One way I accomplish this is to make the sear springs integral to the sear itself. The sear/spring also bears against the triggers making them return to rest after being pulled. The hammers will be driven by coil springs and are rebounding.

And at this point, the stock gets a coat of oil every day, mixed with a little rottenstone. I never do keep count of the coats, just keep going until it looks right. I would guess I have a dozen or so coats now...