baileybradshaw
(.333 member)
13/10/09 12:26 PM
Re: Damascus hornet double...in progress

Shaped the forend wood and sanded the stock to 320. Also have the first couple coats of finish on. I use Permalin to finish my stocks. I like both the sealer and finish. I start by applying a few coats of sealer until it stops soaking in, then follow with a thick coat of finish. Let it dry for a ferw hours, then wet-sand the surface buildup off. Recoat and repeat until the pores are all filled. This stock will only take two rounds as the pores are so small to begin with. From there, I can use a couple of methods depending on the level of sheen desired.

Anyway, here are a few pics....










Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved