| DarylS |
| (.700 member) |
| 16/07/21 01:01 PM |
|
Re: 458 Lott Cases Wanted
|
Quote:
If you can get some .375 H&H cases you could try blowing them out to 458 Lott. Make sure to anneal before each stage.
Or - if new .375H&H brass, neck up to hold a .458 bullet and fireform. bingo-done - then anneal, trim to length if necessary to square up case mouth.
That is how I made .50 Alaskan cases - necked .348" brass to .50 - one pass, then seated a .50 cal. bullet and fireformed - done.