eljefedouble
(.300 member)
09/02/14 12:33 AM
Re: Just started Casting - Learning a lot

before you mix , suggest you check these guys out? some one may have done it already...

http://castboolits.gunloads.com/showthread.php?83552-Lube-stick-molds-my-version

http://castboolits.gunloads.com/showthre...-in-boolit-lube

And with all that BW, Felix lube might be therapeutic

Felix Lube formula (for smokeless)

2 Tablespoons mineral oil
1 Tablespoon castor oil
1 Tablespoon Ivory, or homemade soap (grated)
1 Tablespoon Lanolin
Beeswax - Piece approximately 3 1/2" X 3 1/2" X 1 "

Heat mineral (baby) oil until it starts to smoke.

Add castor oil, and stir continuously for 1/2 hour.

Sliver the soap, and stir into the mixture a little at a time, until melted.

Add the beeswax before the lanolin, and then when that is melted, reduce or remove the
heat and add the lanolin, thus not running any risk of burning or scorching the lanolin.

1 teaspoon of carnauba wax can be added to give a shiny bore. This can be found on the
seal of Makers Mark whiskey, or the red wax on cheese from the supermarket.

Once made, let cool. This can be remelted in a microwave, and poured into the lubrisizer.


me?I find it therapeutic-casting, mixing lubes.
cheers



Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved