Gentlemen,

my experience with reduced loads consists mostly of the german Haendler& Naterman bullets which are soft lead, copper plated and coated with cetyl alcohol (for friction reduction in the bore)

.375 H&H
case: Remington or Winchester
bullet: 250grs Haendler& Naterman RN lead copper plated
Powder: Kemira N110 30.0grs
Primer: CCI LR
seating depth: bullet seated ca. one diameter length (9-10mm) in case
velocity 530 m/s (22" barrel Sako)
energy: 2275 Joule
precision @ 50 meters: ca 2 inches for 5 shots

This above mentioned load is for information only.

best regards
Rolf