Can't understand the issue with the Lyman 450. Had one for years, sized and lubed from 7mm, 45 and 38 cal pistol, to 404J. Different styles in those calibres, different number of lube grooves, with and without gas checks. Simple enough to change dies, simple enough to set up for different depths to fill the grooves on anything put through it. Hardly rocket science stuff.
Make sure your sizing die is correct for your bore size and the bullet is casting large enough to actually size in the die(enough tin in the mix to fill out in the mould. If you try to size an undersized bullet you can expect to see lube where you don't want it.