VonGruff
(.400 member)
23/03/17 03:43 PM
Re: A gas fired forge in the making

Needing something to set the forge and gas bottles on, a few bits of angle iron were cut into apropriate lengths with a top and a shelf cut ready for when it is welded up.



Then it was back to the anvil. The base had the mounting holes drilled and the heavy block cleaned up. I decided to go with the die plate and cut a piece off the end that will be welded on the heavy block with a step down. I still have to do the hardy holes and get a horn made.




Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved