500Nitro
(.450 member)
20/01/04 10:12 AM
Re: Removal of copper from rifle bores

Thomas,

I use Flush Out when I want to clean everything out of an Action, ie Mauser 98 but
it is NOT available in Australia as I only imported 6 cans to test it.

Other products are also available on the market here so it could be just another "me to".

However, since you are in the US, I would say yes, get 1 can and give it a go.

Hope this helps

500 Nitro

PS - REMEMBER - Wipe Out does NOT Smeell bad / chemically so it is easy to forget
not to get it anywhere where you shouldn't. Keep Wipe Out away from your stock.

I would also suggest you get some 6mm clear plastic tubing and apply Wipe Out from
the CHAMBER end of Bolt Action rifles - but make sure you seal the chamber with
the plastic tube (or it foams back towards the action).

I don't want to sound onerous but just passing on what works.














Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved