458RugerNo1
(.224 member)
18/07/05 07:25 AM
Re: Ruger RSM 77 .375

All guns need a little going-thru when you first get them.

Take a very fine grit sandpaper and polish/smooth the feed ramp, magazine lip/rails, etc to smooth the feeding and eliminate case marring from those sharp edges...

As for the ejection, that's easy. It's got to be the ejector spring being a bit weak or perhaps it's gummed up with crud or goo. As a matter of course clean out that slot in the action that it moves within, also the slot in the bolt that it moves within (check these areas for any burrs that might be causing the grief also)... Change the spring if necessary and I'd wager you'll be in business.

I have the same .375 RSM and I swear by it. The Ruger RSM is a truly classic rifle and a helluva package for $1200 IMHO. Mine is without question my all-time favorite rifle...



Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved