Mickey .. slug your barrel and tell me what it read's
Is it rifled or not is it a smooth bore ? or chocked
can thay be removed ..

Mickey .. for somthing odd that i dont have dies for it takes about 5 months and i need to have a person order atleat 500 bullet's in what every the order is for

My list is so long that i don't think the folks here would like it if i posted my full line of bullet's .
On a print out its 9 pages back to back long
from .358 diameter to 2 Ga/Bore

.358
.366
.375
.403
.405
.416
.423
.458
.465
.475
.483
.510
.550
.585
.618
.620
.700
.750
The above can be had in a jacket walls from 0.018 to 0.065
In Copper and the above can also be had in Guilded metal
from 0.010 to 0.030.
All bullet's are Bonded -- I don't make unbonded bullet's
don't ask for them.
The above bullet's can be had in a RN-Round Nose & 10%deg taper to a flat point<- FP, And a Lead cored Turned Based
bullet TB <-- A turn base is a lead filled jacket thats been turned around so the base of the bullet is the nose
the end is rolled over to hold the core in as well as the bonding that holds the core .the turn base is not! a true soild .But rather a set down . It will funtion like a solid .Braking bone and holding together but it will bend some. It's alot like using a super heavy walled jacket
on the lines of 0.80 it don't bend much or mushroom.

And i will be swaging solids soon from rod stock.
These are not turned bullet's but are swaged to form them.

Sum up ..

I make bullet's in RN .FP .TB and soon there will be a true Solid
with all that said i will make odd ball shape bullet's of what every it is that turns your fancy.
But like i have said before its a 5 month weight
I have to order the swage die set's .Whats required is
that you buy 500 of them from me when i am finished

Now as for price's ..
right now i am working on Ed Hubels bullet's for his
700 HE .700 diameter i am making Ed 850 grain Hollow points and 1000 grain semi round nosed.

The price of the bullet's was pre set before i ordered the dies . $ 2.15 for the 1000 Grain in a 0.050 jacket wall
each and $ 1.15 for the 850 grain hollow point's each
in the same jacket wall size 0.050 Copper ,

-----------
Now were you plaining on using a sabot for your bullet's in the 20 Ga.

Mickey tell me just what you want ..Diameter... lenght..
etc

Pottsy