CommandCar
(.333 member)
22/11/17 09:23 AM
.404 Chamber Reamer dimensions?

A friend spoke to PTG about a .404 NE reamer and they said there are 2 versions. Version 1 is the CIP standard reamer. Version 2 is another reamer that cuts a very slightly tighter chamber with a different throat angle and pitch. I do not have the drawings with me, but the CIP seemed to cut a slightly sloppy chamber and version #2 cut one closer to the case dimensions listed in Cartridges of the World. PTG says version #2 is popular right now. Which one should my friend order and why?

Thanks in advance.

CC



Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved