BFaucett
(.333 member)
31/12/04 03:33 AM
Re: 350 gr. 375 H&H

Below is the .375 H&H load data for the 350gr Barnes Original bullet taken from the old Barnes Reloading Manual Number One. The Barnes Original is a lead core "cup and core" bullet. Of course, bullet shapes will vary as will bearing surface length, etc. but it should be close to the Woodleigh 350 gr bullet. The data should at least provide a starting point.

One note of caution: I don't know if Barnes used a pressure gun or not when developing the load data for Manual #1. (Many bullet makers did not have access to pressure guns for testing years ago like they do now.) As always, start low and work up. I have not tried any of these loads.

Also, you might to want take at look at the .375 H&H with 350 Gr Bullets thread here on the NitroExpress forums.

-Bob F.






Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved