Could you pass on the details of your Linotype load for the .404 J please.
Like Mould brand & part# and powder charge etc?

HooRoo
From
Hommer

I designed my own bullet and sent the data to Hoch mould and Mr Farmer made a beautiful job of the mould although he was not very good on delivery dates and didn't supply the top punch I payed for.

Happy to send sample bullets so a mould can be made.

It is a 350gn Lino gas check and I have a accuracy load at 1900fps that has shot into .33 through the aperture of the bench at 55 yds. Norma case, WLRM, 63 gn 2209 ( H4350)

Same detail but 74gn 2208(Varget) for 2365fps and 1.1 in. This loadf is good for recoil recovery practice and getting the second and subsequent shots away, accurately.

Because lino is getting harder to get a hold of I also did a 90/10 WW and Lino blend and heat treated the bullet and with 87gn 2209 I got 2416fps and 1.1 in while 80gn of 2208 gave me 2485 but groups opened up to 2in. 79gn 2209 gave 2465 and 1.35in so that is a good standby load as well.

Von Gruff.