LMAO!!!! I like the banana for a stock pattern! I also forgot to mention that the barrel needs to have a decent crown machined as the existing one is just begging to be damaged. A good smith could work the interior of the action over and make it very nice. Like I said, I will buy their actions(CZ) but not the complete rifles. I would not encourage the use of a Dremmel tool unless the user knows what he is doing. I also forgot to mention that the recoil lugs on my rifle were only making contact with about 30% of each lug, so the barrel needs to be pulled so the action can be squared and the lugs lapped into perfect contact. I am also amazed at the funny recoil lug that they used? Weird to say the least. I would scrap that as well and have a lug soldered on the barrel. Finally a pair of cross bolts would be nice and very functional as well. Just my opinion.