Daryl

You're absolutely right, and I'll remove it and glass in that area. There is a small crack starting right there, as there are in my other two Husqvarna stocks.

BF

Thanks for the data. I used 55gr of R15 for the first go with RSW primers. They are hotter than the common standard rifle primers and milder than magnum primers. I have always gotten better accuracy with them when using medium to slower burning rate powders in smaller than magnum cases, like the 9,3x62. Seeing as how the pressure was so low at 55gr, I think I'll bump up to the 58gr loading; it seems to duplicate Norma factory velocities. I will also try some Nosler Partitions in 286gr with 57gr R15.

In looking over the rifle a bit more, I believe I will have to go no bigger than 286gr bullets, as the magazine is not all that long, and I don't want to alter it.

The scope mount looks a lot like a Paul Jaeger 4B High Mount with windage, but not exactly like one. It has two levers and slides onto the side mount rail. Only the rings are aluminum. It seems to be rock solid, so I don't care whose it is.

Again, thanks to both of you.