Marrakai
(.416 member)
28/09/05 09:50 PM
Re: Problem with a #4 mk2

Hmmm, curious. Looks like the half-cock notch has already been beveled.

You've got a lot of gunk on those internals though, Gibbs505, maybe a good clean-up will solve the problem. Perhaps the trigger is not dropping freely away after the sear breaks. At least with the Mk 2 you can dry-fire it while disassembled, so why not try to duplicate the problem before replacing the forewood. I will be most interested to hear your findings.



Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved