| Rhodes |
| (.275 member) |
| 02/01/20 09:44 AM |
Re: Brno zkk 600 in 8x68s.
|
Quote:
Well I have got my 8x68s finnished.
It is built on a zkk 600 action opended up by a couple of mm's. I am loading 200 grain Woodleigh PP and Speers with 72 grains of 2209 with a c.o.l of 90mm for 3000 fps.
The barrel is a 26" #722 Lothar Walter supplied by Axel(HuntingSchneider)on NE.
All bits and pieces came from Greame Sraggon (0427319589)grip cap and sling swivels.
Daryl Stevens (0419772048) suppiled the timber and did all the stock work.
Hi Fatboy404
sorry for dragging up an old thread but maybe you could help.
You mentioned that you used a Lothar Walther #722 barrel for this build. I see on the Lothar Walther website they have pre-chambered / pre-fit #722 profile, 26" barrels threaded to suit M98 actions available. Is this the barrel used for this build or is the BRNO ZKK specific thread different to a M98?
I ask because I intend to re-barrel a ZKK 600 and am looking at grabbing on of these barrels in 9.3.