Hi Joshua
I sand the wood to 400 and make sure there are no mark left by previous grits
I put on several coats then cut back with 800 to fill the pores--repeat until filled
I put on 8/10 plus the cut back with 800 to remove and dust ect
let harden for a few days and polish with pumice and rottenstone to the finish you want
if a higher gloss is needed a very light coat of checkering will bring up the gloss
contact me if more info is needed
Sydney
Daryl---I use pumice for a fast cut
rottenstone for a finer polish
car cut polish if req d
I have lots of both and will drop off some at Taylors later in the week
Sydney