Rolf
(.333 member)
14/08/15 08:57 PM
Re: 9.3x64

Hello gryphon,

I can recommend the 9,3x64 if you have access to the cases.
In my opinion the 9,3x64 is the ballistic twin to the .375 H&H, but more precise due to the standard case design (without a belt).
My impression is that you do not have to trim the cases as often as in the 375 H&H.

bullets and use:
- 255grs RWS Doppelkern and 232grs Norma PPC Oryx for somewhat reduced loads/smaller game
- the 250grs TSX or 250grs Accubond for longer ranges
- the 270grs Speer for training (szihn reported that it is a little bit soft on game)
- 286grs TSX or Woodleigh PP for larger game
- Reichenberg HDB are coated monometal bullets, available in some weights and very precise

A 24" barrel may be the best barrel length, as the 9,3x64 uses medium to slow burning powders.
Precision was only bad with severe downloaded cartridges, but I found it very precise with all bullet weights from 225grs to 286grs in standard velocity loadings.

best regards
Rolf



Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved