|
|
|||||||
As most of you know both FATBOY404 and myself have our rifles built by Tony Small (AFRO408) Nickal Traditional Gunsmiths http://nickalguns.net/ useing Lothar Walther barrels. While these rifles are very nice to look at both Neale and I use these rifles. They are not safe queens and must perform. Well it's bragging time. Today in 35 C (95 F) heat, supported off a bipod at a lazered (Leica 900) 249 yards, I put three rounds into a lovely Right Isosceles Trangle measuring 1.105" on one of my printed targets. I have been shooting my 7x57 in preparation for a red Deer shoot in NZ this April. With 521 rounds through the barrel I have been learning and practising the fall of shot at different ranges. I use empty 750g round tins of Milo which have a 5" circular base. I lay these down at different ranges and practise hitting them. The MAGIC recipe: Norma unfired brass, Remington 9 1/2 primers (I tried Remington 9 1/2 and Federal 210 primers and in my rifle the 9 1/2's gave better accuracy.) OAL 3.070" 40 grains of 2208/Varget Sierra 140 SptBt's. Average Velocity 2,499 fps Now if I can get the temperature in NZ up to 35 deg I'll be right. Well done and Thx AFRO. Edit: Spelling |