| FATBOY404 |
| (.400 member) |
| 24/01/12 06:45 PM |
Re: 458's turn !
|
Quote:
With BM2, I emailed Woodleigh several weeks ago and got this response. Hope its OK to post.
"Whilst 2206H and 2208 are fine, Bench Mark 2 is best, fine grained, it fits in the case easily. Use 70-73 grains for around 2150-2200 fps. Use Federal or CCI MAG primers. The 480gr bullet leaves you a bit more room than 500gr. If you want to use2206H and 2208, simply use 500gr charges as listed in ADI manual."
Does anyone have the ADI manual loads? Could they PM me or post here (if thats ok).
Cheers
Ash.
Just Google "ADI" and you select "Rifle data" then caliber and you are there.
Got 450 Ackley to run Aushunters load and it is only 60 psi under maximum load.
72 grains of 2206H under the 480's will give you 2139 fps without the same pressure.