Home | Ezine | Forums | Links | Contact
NitroExpress.com: Martini System 12 Gauge what Rifle Caliber is possible?!

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Single Shots & Combination Guns

Pages: 1
tino
.224 member


Reged: 14/04/08
Posts: 4
Loc: Germany
Martini System 12 Gauge what Rifle Caliber is possible?!
      #102505 - 15/04/08 05:09 AM

Hello ,
i am so helpless ..but of course begin ..so i have the idea the martini Henry Police gun System 12Gauge to use for an Big game Rifle.. so what for an Caliber is Usefull in this system!?
Please dont look so close on my english but i am from germany and do my best !please answer for my question!
thanks a lot Tino


Post Extras: Print Post   Remind Me!   Notify Moderator  
Marrakai
.416 member


Reged: 09/01/03
Posts: 3475
Loc: Darwin, Top End of Australia
Re: Martini System 12 Gauge what Rifle Caliber is possible?! [Re: tino]
      #102535 - 15/04/08 01:16 PM

Tino:
My preference would be for a fully-rifled 12-bore, and shoot big conicals at modest velocity! ....but then, I'm a little strange that way!

Most of the big NE cartridges are relatively low pressure, but still much higher than a shotshell. Nevertheless, I could recommend the .577 x 2 3/4 Light Nitro, as I know it will fit (just) through the MH action. Most of the long NEs won't go 'around the corner' and into the chamber.






The .577/.450 Martini Henry cartridge was designed to go 'round the corner', and did have an express loading for big game a century ago. Today it could be loaded with a light nitro charge and jacketed .458 bullets to make a potent hunting cartridge. Brass is available. If using an original barrel, check the groove diameter though as it might not be .458.

Do you already have the police gun? If not, you might be better off with a standard Martini Henry or Martini Enfield rather than the shotgun variation, because those actions have more metal behind the hinge-pin than the GP or police-gun.





--------------------
Marrakai
When the bull drops, the bullshit stops!
--------------------------------
www.marrakai-adventure.com.au


Post Extras: Print Post   Remind Me!   Notify Moderator  
DoubleD
.400 member


Reged: 23/11/03
Posts: 2386
Loc: Retired in Oklahoma
Re: Martini System 12 Gauge what Rifle Caliber is possible?! [Re: Marrakai]
      #102536 - 15/04/08 02:07 PM

The Police Gun is a Greener pattern Martini Style action and not a Martini Henry.

The used full stock police guns when found are usually found in very poor condition. Look for a Greener Martini EG or GP shot gun or as Marrakai suggest a Martini Henry.

If you go with the Greener gun get one with out the split action for the take down barrel. The Greener also come with a safety, the Martini Henry does not have a safety. Also do not get a Greener GP that c-clips holding the pins in.

I have been told that I am now the proud new owner of a 577 2 3/4 NE. Haven't seen the gun yet but it is supposed to be on a Greener action.

I have a Martini Henry MKIV that was rechambered to .375 2 1/2 Flanged NE. This is the humpback military action. Shoots good, but haven't killed anything with it yet.

Another useful caliber in this gun is the Westley Richards Musket No.2 also known as the .450 Musket No. 2 or incorrectly the 500/.450 Musket No. 2.

A bit passe, but a useful caliber is the American 45/70.

--------------------
DD, Ret.


Post Extras: Print Post   Remind Me!   Notify Moderator  
DoubleD
.400 member


Reged: 23/11/03
Posts: 2386
Loc: Retired in Oklahoma
Re: Martini System 12 Gauge what Rifle Caliber is possible?! [Re: DoubleD]
      #352183 - 09/04/21 07:47 AM

Wow I wondered how long I have had that 577 2-3/4"

I have never shot it, dislike the gun is is PITA to work on.

Disassembly is difficult.

Still haven't worked out how trim the brass reliably. can't find a case trimmer to fit. I think this is the biggest issue for me.

--------------------
DD, Ret.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Marrakai
.416 member


Reged: 09/01/03
Posts: 3475
Loc: Darwin, Top End of Australia
Re: Martini System 12 Gauge what Rifle Caliber is possible?! [Re: DoubleD]
      #352187 - 09/04/21 08:26 AM

Thanks for digging that out DD.
Pity the rifle doesn't inspire, after going to the effort.

I trim the cases down from 3-inch to 2 3/4 with the thin cut-off wheel of a Dremel, then keep them within spec with a jeweler's file!
The latter is hardly ever necessary though...

--------------------
Marrakai
When the bull drops, the bullshit stops!
--------------------------------
www.marrakai-adventure.com.au


Post Extras: Print Post   Remind Me!   Notify Moderator  
EDELWEISS
.375 member


Reged: 22/11/05
Posts: 592
Loc: Gettysburg
Re: Martini System 12 Gauge what Rifle Caliber is possible?! [Re: Marrakai]
      #352190 - 09/04/21 09:08 AM

Quote:

Thanks for digging that out DD.
Pity the rifle doesn't inspire, after going to the effort.

I trim the cases down from 3-inch to 2 3/4 with the thin cut-off wheel of a Dremel, then keep them within spec with a jeweler's file!
The latter is hardly ever necessary though...




Ive got a tiny circular saw with a 2" blade. I bought it at Harbor Freight for maybe $20. I found a guy on ebay who 3D prints jigs for shortening brass. I dont know all the jigs he makes but Id bet hed make one for 3 to 2 3/4

--------------------
If it's not custom, it's just borrowed


Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 26414
Loc: Beautiful British Columbia, Ca...
Re: Martini System 12 Gauge what Rifle Caliber is possible?! [Re: EDELWEISS]
      #352192 - 09/04/21 09:29 AM

Those Harbor Freight cutoff saws are used by a bunch of guys on a small bore forum I frequent. They like them. A V cradle of steel or wood would work just fine as a holder, wouldn't it?

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V

Edited by Daryl_S (09/04/21 09:30 AM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
EDELWEISS
.375 member


Reged: 22/11/05
Posts: 592
Loc: Gettysburg
Re: Martini System 12 Gauge what Rifle Caliber is possible?! [Re: DarylS]
      #352245 - 10/04/21 09:27 PM

Quote:

Those Harbor Freight cutoff saws are used by a bunch of guys on a small bore forum I frequent. They like them. A V cradle of steel or wood would work just fine as a holder, wouldn't it?




Yeah I assume a "V" would be fine. I think the "printed" ones extend past the cut off point (to add support for the case). They are needed most for cases with a rim to keep everything level. Without something to keep everything level you get a cut an angled cut

--------------------
If it's not custom, it's just borrowed


Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 26414
Loc: Beautiful British Columbia, Ca...
Re: Martini System 12 Gauge what Rifle Caliber is possible?! [Re: EDELWEISS]
      #352267 - 11/04/21 05:07 AM

Depends on how you cut/make your V block. If made of wood, you can make it right, so the cut is square.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
DoubleD
.400 member


Reged: 23/11/03
Posts: 2386
Loc: Retired in Oklahoma
Re: Martini System 12 Gauge what Rifle Caliber is possible?! [Re: DarylS]
      #352275 - 11/04/21 09:53 AM

I have the Harbor freight chops saw. Never cared for it that well. Lacks the precision I seek. But I have it.

I have been thinking about getting a piece of tubing and running my reamer in it and making a cutting guide.

Stick the brass in the guide, cut off the brass that sticks out.

May do the same for my 577/450.

--------------------
DD, Ret.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
0 registered and 44 anonymous users are browsing this forum.

Moderator:  Huvius 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 9000

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved