Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Powder Coating and the Paradox

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Paradox and Bore Guns

470evans
.333 member

Reged: 30/03/05
Posts: 278
Loc: Texas, USA

Powder Coating and the Paradox
08/06/20 10:39 PM

I have owned a Holland Paradox for the past 12 years and have had success loading for it.

The one frustration I had was in practicing after 3 or 4 shots in a barrel leading would become a problem. I tried coating with Alox with poor results having the best results by wrapping the slug in Teflon tape but would still get leading.

Typically when hunting I never shot more than one or two slugs so I just learned to live with it at the target range.

I recently got into casting for a 45 Colt. In learning about that I discovered powder coating as a way to avoid leading as well as eliminating the need to lube the bullets.

After having success with powder coating the handgun bullets the idea hit me to try it on the Paradox. So I cast some of the big slugs, powder coated them and after sizing them in my push through die loaded some rounds this am and went to the range.

I couldn't tell any difference on the target and best of all experienced no leading.

Target shown was at 50yds, think I pulled that 4th shot a bit left. When I was younger I could see the target better, it's hell getting old!

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Powder Coating and the Paradox	470evans	08/06/20 10:39 PM
Re: Powder Coating and the Paradox	tinker	09/06/20 12:09 AM
Re: Powder Coating and the Paradox	rigbymauser	09/06/20 01:48 AM
Re: Powder Coating and the Paradox	DarylS	09/06/20 02:05 AM
Re: Powder Coating and the Paradox	470evans	09/06/20 04:06 AM
Re: Powder Coating and the Paradox	470evans	09/06/20 04:11 AM
Re: Powder Coating and the Paradox	DarylS	09/06/20 02:02 PM
Re: Powder Coating and the Paradox	NitroX	09/06/20 09:50 PM
Re: Powder Coating and the Paradox	93x64mm	09/06/20 10:25 PM
Re: Powder Coating and the Paradox	tinker	09/06/20 11:25 PM
Re: Powder Coating and the Paradox	470evans	10/06/20 12:48 AM
Re: Powder Coating and the Paradox	SwedenParadox	24/07/20 10:37 PM
Re: Powder Coating and the Paradox	470evans	10/06/20 12:56 AM
Re: Powder Coating and the Paradox	rigbymauser	10/06/20 01:51 AM
Re: Powder Coating and the Paradox	DarylS	10/06/20 01:59 AM
Re: Powder Coating and the Paradox	NitroX	10/06/20 05:38 PM
Re: Powder Coating and the Paradox	dearmer	07/07/20 11:20 PM
Re: Powder Coating and the Paradox	DarylS	08/07/20 02:17 AM
Re: Powder Coating and the Paradox	iomskp	12/07/20 12:06 AM

Extra information

0 registered and 11 anonymous users are browsing this forum.

Moderator: tinker

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 4136

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved