Home | Ezine | Forums | Links | Contact
NitroExpress.com: poor mans paradox gun

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Paradox and Bore Guns

Pages: 1
sourdoughsmitty
.224 member


Reged: 08/11/15
Posts: 19
Loc: washington and alaska
poor mans paradox gun
      #337752 - 10/02/20 12:25 PM

I have a uestion here concerning building a poor mans pardox gun
I got the idea in a book I seen years ago on shooting the british double rifle ,from what I saw these were shotguns that were rifled only in the last few inches of the barrel ,so my donor gun for this is a savage fox in 12gau. would it be feasible to shorten the barrels to balance on the hinge pin ,install rifled tubes and of course rifle sights to do somewhat the same thing?
I do know too that to use rifle sights the comb would have to be raised ,I got this from a discussion I believe with member bird hunter when we discussed making a double rifle out of it ,so anyone here have ideas to bat around? as I already have this cost would be low ,converting this to a double rifle would not be dollar feasible I am a machinist by trade so I know for whatI would have in it there are many fine used ones designed as such I could buy

thanks smitty

--------------------
n/a


Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39059
Loc: Barossa Valley, South Australi...
Re: poor mans paradox gun [Re: sourdoughsmitty]
      #337756 - 10/02/20 05:39 PM

Good place to have a look.

Paradox and Bore Guns (3 viewing)
http://forums.nitroexpress.com/postlist.php?Cat=0&Board=paradox

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras: Print Post   Remind Me!   Notify Moderator  
sourdoughsmitty
.224 member


Reged: 08/11/15
Posts: 19
Loc: washington and alaska
Re: poor mans paradox gun [Re: NitroX]
      #337783 - 10/02/20 11:08 PM

thanks i will repost it there

--------------------
n/a


Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39059
Loc: Barossa Valley, South Australi...
Re: poor mans paradox gun [Re: sourdoughsmitty]
      #337791 - 11/02/20 12:02 AM

Quote:

thanks i will repost it there




No need. I will shift it. I was referring you to a good place to search and have a read.

I am sure there have been threads on modifying a shotgun as you suggest to r-create a paradox or explora style rifled shotgun.

I think there was also a thread on an Italian modern maker doing it?

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras: Print Post   Remind Me!   Notify Moderator  
buckstix
.400 member


Reged: 07/11/12
Posts: 1091
Loc: Whitetail Country
Re: poor mans paradox gun [Re: NitroX]
      #339060 - 15/03/20 12:14 AM

Hello sourdoughsmitty

You might look at this .... lots of gun for the money

http://www.doublegunhq.com/itemDetails.aspx?id=4970

here's the home page

http://www.doublegunhq.com/searchFrame.htm

--------------------
"You never pay too much for something, you only buy it too early."


Post Extras: Print Post   Remind Me!   Notify Moderator  
Huvius
.416 member


Reged: 04/11/07
Posts: 3517
Loc: Colorado
Re: poor mans paradox gun [Re: buckstix]
      #339064 - 15/03/20 07:31 AM

I think, once the barrels are cut, try out some slugs and roundballs.
May surprise you and if accuracy is acceptable no less fun than a rifled gun.

--------------------
He who lives in the past is doomed to enjoy it.


Post Extras: Print Post   Remind Me!   Notify Moderator  
93x64mm
.416 member


Reged: 07/12/11
Posts: 3954
Loc: Nth QLD Australia
Re: poor mans paradox gun [Re: buckstix]
      #339115 - 16/03/20 08:31 PM

Quote:

Hello sourdoughsmitty

You might look at this .... lots of gun for the money

http://www.doublegunhq.com/itemDetails.aspx?id=4970

here's the home page

http://www.doublegunhq.com/searchFrame.htm




Nice piece of kit you found there Buckstix!
Obviously not a true 'paradox', but certainly capable for sure!


Post Extras: Print Post   Remind Me!   Notify Moderator  
50Calshtr
.300 member


Reged: 01/11/05
Posts: 119
Loc: Southeast Georgia
Re: poor mans paradox gun [Re: 93x64mm]
      #339158 - 18/03/20 02:37 AM

Smitty,
I've done it twice, both times with old Stevens 311s. The first I did about 25 years ago, cut the barrels to 21", added a Williams short ramp front and one of their adjustable rear sights and was able to get 4-5 inch groups at 40 yards using cheap Remington green box slugs. The current one I've cut to 22" and gave it the same sights. I had a welder tig a wedge between the barrels at the cut just to keep them solid. I'm handloading my slugs using a Lee 1 Oz mould, Double A hulls and Bluedot powder. The load development is not complete but it looks like I can match the earlier results at about 1300 fps. Both got whatever recoil pads were handy and both need/needed trigger work, triggers are heavy and rough, OK for a cheap shot gun but not for trying to shoot groups. I've not tried buckshot in the current but I'd expect typical cylinder bore results. Both turned out to be stout, good looking guns.


Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 26413
Loc: Beautiful British Columbia, Ca...
Re: poor mans paradox gun [Re: 50Calshtr]
      #339166 - 18/03/20 08:26 AM

I also did this to a SxS with good results at 24" with round balls and black powder as well as smokeless.
I did not install rifled tubes but that is definitely doable.
My gun held them inside 10" at 100 meters.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V

Edited by Daryl_S (18/03/20 06:23 PM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
0 registered and 10 anonymous users are browsing this forum.

Moderator:  tinker 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 4016

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved