Home | Ezine | Forums | Links | Contact
NitroExpress.com: Monoblock vs. Chopper Lump

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Double Rifles

Pages: 1
jagermeister
.224 member


Reged: 07/06/06
Posts: 14
Monoblock vs. Chopper Lump
      #60422 - 27/07/06 07:03 AM

There's a big difference in price between monoblock and chopper lump barrels. Any big downside in functionality and performance with monoblock barrels?

How many of the new manufactured guns use chopper lump barrels?

Does Heym, Merkel, Krieghoff or Searcy use chopper lump barrels?

Thanks!


Post Extras: Print Post   Remind Me!   Notify Moderator  
500Nitro
.450 member


Reged: 06/01/03
Posts: 7244
Loc: Victoria, Australia
Re: Monoblock vs. Chopper Lump [Re: jagermeister]
      #60425 - 27/07/06 09:09 AM


chopper lump barrels cost more to make and are "better", although I don't
think you would see any failures from Mono block guns.

It was a "prestiege thing" in the past where "best guns" had
Chopper Lump barrels.

500 Nitro




Post Extras: Print Post   Remind Me!   Notify Moderator  
400NitroExpress
.400 member


Reged: 26/11/03
Posts: 1154
Loc: Lone Star State
Re: Monoblock vs. Chopper Lump [Re: 500Nitro]
      #60430 - 27/07/06 12:47 PM

As .500 says, it's largely an issue of prestige. Chopper lump tubes are usually used on more expensive guns. Mono-bloc construction doesn't get as much respect because so many cheap, low quality guns have been made that way.

In the days of damascus and twist steel barrels, lumps were usually dovetail (although there were a few damascus chopper lump guns built). As fluid steel displaced damascus, many of the very best British and European double guns continued to be dovetail lump, because that's what the older, experienced barrelmakers knew how to make. These were gradually displaced by chopper lump, and with respect to double rifles, also shoe lump.

Chopper lump is considered the best, but that's still primarily prestige. Steels that are truly ideal for barrels are not ideal for lumps and vice versa. The advantage of dovetail or shoe lump barrels (in other words, brazed on lumps) is that you don't have to use the same steel for both and no compromise is necessary. I don't know enough about monobloc construction to say, but the same may possibly be true of them. With chopper lump, the lumps are integral to the barrels.

In terms of real quality and durability, the barrel construction method isn't significant in comparison to overall built quality. Many fine double rifles have been made with all four methods and junk has been built with chopper lump barrels. My only gripe about monobloc construction is when the seamless method is not used. A visible join is unacceptable on a $10000 doublegun, whether shotgun or rifle.
---------------------------------------------------------------------------

--------------------
"Serious rifles have two barrels, everything else just burns gunpowder."


Post Extras: Print Post   Remind Me!   Notify Moderator  
bulldog563
.400 member


Reged: 21/10/05
Posts: 1153
Loc: California
Re: Monoblock vs. Chopper Lump [Re: 400NitroExpress]
      #60446 - 27/07/06 09:43 PM

Here is website that may be of interest.

http://www.hallowellco.com/lumps.htm

--------------------
Join the National Rifle Association:
https://membership.nrahq.org/forms/signup.asp


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
0 registered and 45 anonymous users are browsing this forum.

Moderator:  CptCurl 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 3925

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved