Home | Ezine | Forums | Links | Contact
NitroExpress.com: converting rimmed extractor to rimless

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Building Double Rifles & Gunsmithing
Previous thread Previous   View all threads Index   Next thread Next   Flat Mode Flat  

gungadoug
.333 member


Reged: 13/08/12
Posts: 285
Loc: NM
converting rimmed extractor to rimless
      17/09/15 10:53 PM

I have an 8x60R double rifle, and a problem. While I have made brass from 9.3x74r, that is not satisfactory because the head is too small, and with any kind of decent pressures will soon cause separations. I find I can buy, reasonably, 8x60S rimless brass, so intend to build a rimless extractor to replace the rimmed one. I am looking for ideas on how to design this so it can be machined without EDM capability. Simplicity is of course a good thing, as is reliability. I don't seem to be able to find any real good pictures of commercially made ones, or drawings. Any help would be greatly appreciated!!

Thanks, Doug

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* converting rimmed extractor to rimless gungadoug 17/09/15 10:53 PM
. * * Re: converting rimmed extractor to rimless aromakr   18/09/15 12:48 AM
. * * Re: converting rimmed extractor to rimless gungadoug   18/09/15 10:22 PM
. * * Re: converting rimmed extractor to rimless aromakr   19/09/15 01:36 AM
. * * Re: converting rimmed extractor to rimless gungadoug   20/09/15 10:29 PM
. * * Re: converting rimmed extractor to rimless Kiwi_bloke   27/09/15 08:16 AM
. * * Re: converting rimmed extractor to rimless Kiwi_bloke   27/09/15 09:20 AM
. * * Re: converting rimmed extractor to rimless DarylS   27/09/15 09:28 AM
. * * Re: converting rimmed extractor to rimless karamoja   27/09/15 04:38 PM
. * * Re: converting rimmed extractor to rimless spinna   27/09/15 08:09 PM
. * * Re: converting rimmed extractor to rimless gungadoug   27/09/15 10:08 PM
. * * Re: converting rimmed extractor to rimless Kiwi_bloke   28/09/15 06:20 AM

Extra information
0 registered and 40 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 2122

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved