Home | Ezine | Forums | Links | Contact
NitroExpress.com: Two questions about American gunsmithing

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Rifles

Pages: 1
Major_Bonkers
.224 member


Reged: 22/05/20
Posts: 10
Loc: London, England
Two questions about American gunsmithing
      #343648 - 26/07/20 02:44 AM

I have two questions about American gunsmithing which I hope that someone might be able to answer.

The first relates to the Purdey 'chassis system' - see: https://www.purdey.com/guns-rifles/new-bolt-action-rifle - which is a titanium insert in the stock/ fore-end of the rifle onto which the barrel is screwed (rather than the stock itself). I am sure that I have seen the same system used in America, and if anyone can point me in the right direction I would be most grateful.

Secondly; Border barrels, now Sassen Engineering, is where most British guns are barrelled. However, they are not able to mill the foresight and sling eye onto the barrel when they are milling it; so these bits must me soldered on later. The question that I have is - where can the barrel be milled with the foresight and sling eye inclusive? (I thought that it was Alaska Arms, but it is not on their website).


Post Extras: Print Post   Remind Me!   Notify Moderator  
tinker
.416 member


Reged: 12/03/05
Posts: 4835
Loc: Nevada
Re: Two questions about American gunsmithing [Re: Major_Bonkers]
      #343654 - 26/07/20 05:52 AM

Barrel question first

There are numerous American Gunbuilders who can make your barrel. The regulations around exporting a gun barrel out of the continental USA are tedious to the point of being prohibitive.

One such Gunbuilder who comes to mind is Duane Wiebe of Tacoma Washington.

I won't bother to estimate a price for you, besides noting that the job is expensive.


Chassis stock question

HS Precision, McMillan, and some others offer composite stocks featuring integral metal bedding block systems.
I do not know of an American stockmaker who is offering hardwood stocks featuring this type of bedding system - but there may be someone doing it here in the USA



Cheers

--------------------
--Self-Appointed Colonel, DRSS--



"It IS a dangerous game, and so named for a reason, and you can't play from the keyboard. " --Some Old Texan...


Post Extras: Print Post   Remind Me!   Notify Moderator  
Major_Bonkers
.224 member


Reged: 22/05/20
Posts: 10
Loc: London, England
Re: Two questions about American gunsmithing [Re: tinker]
      #343732 - 27/07/20 09:25 PM

Dear Tinker - many thanks for your reply.

Any further details from anyone else gratefully received.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
0 registered and 56 anonymous users are browsing this forum.

Moderator:   

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 1345

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved