Home | Ezine | Forums | Links | Contact
NitroExpress.com: Push Feed vs CRF..which is more reliable..

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Rifles

Pages: 1
Ripp
.577 member


Reged: 19/02/07
Posts: 16072
Loc: Montana, USA
Push Feed vs CRF..which is more reliable..
      #231023 - 09/06/13 11:57 PM


Just read in Outdoor Life--June/July issue page 43--they did a brief test loading 2 push feed, a Remington in 375H&H and Winchester in 30-06 along with 2 CRF's.. a Ruger Hawkeye in .416 Ruger along wiht a Mauser-action Pasadena Arms in 6mm..they ran full magazines at normal hunting speed..first upright, then at a 90degree agle and finally upside down...the 6mm CRF twice popped a cartridge our of the magazine without engaging the extractor..both times the cartridge slid into the chamber ahead of the bolt but the extractor would not pass over the rim so the bolt could not be closed..per the article, does this settle the debate..probably not, but makes one feel better about push feed actions..

Ripp

--------------------
ALL MEN DIE, BUT FEW MEN TRULY LIVE..


Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 26413
Loc: Beautiful British Columbia, Ca...
Re: Push Feed vs CRF..which is more reliable.. [Re: Ripp]
      #231025 - 10/06/13 01:37 AM

Using a defectively feeding CFRF action kinda screws with the validity of the test, doesn't it?

My M98 and the M96 Mausers I had were all been altered slightly, and will all push feed - best of both worlds? You can throw a round into the action and chamber it - NP.
- AND - I've not broken an extractor yet.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
Tentman
.300 member


Reged: 13/06/10
Posts: 128
Loc: Southland, New Zealand
Re: Push Feed vs CRF..which is more reliable.. [Re: DarylS]
      #231034 - 10/06/13 07:07 AM

This sort of argument kinda makes me chuckle. As I understand CRF was to prevent a soldier to jambing his rifle by short stroking the bolt. Supposedly as hunters CRF is going to save our hides by ensuring our rifle will feed even if we do something stupid with the bolt. In both cases if the soldier/hunter is "rattled" enough so that he does not "follow his drill" then his chances of making a useful shot is about zip anyway.

I've seen a few cases of "buck-fever" and had it myself, and no amount of CRF will change the outcome !!

I only hunt with Mauser 98's but its nothing particularly to do with them being CRF.

--------------------
Southland, New Zealand


Post Extras: Print Post   Remind Me!   Notify Moderator  
Rule303
.416 member


Reged: 05/07/09
Posts: 4896
Loc: Woodford Qld
Re: Push Feed vs CRF..which is more reliable.. [Re: Tentman]
      #231036 - 10/06/13 08:21 AM

I have seen a few CRF stuff up and do what they are not susspose to do. Have seen PF stuff up as well. If the rifle is defective or the shooter is defective then the required outcome is not going to happen.

Not sure why you need a rifle to cycle upside down!


Post Extras: Print Post   Remind Me!   Notify Moderator  
500Nitro
.450 member


Reged: 06/01/03
Posts: 7244
Loc: Victoria, Australia
Re: Push Feed vs CRF..which is more reliable.. [Re: DarylS]
      #231037 - 10/06/13 08:40 AM

Quote:

Using a defectively feeding CFRF action kinda screws with the validity of the test, doesn't it?

My M98 and the M96 Mausers I had were all been altered slightly, and will all push feed - best of both worlds? You can throw a round into the action and chamber it - NP.
- AND - I've not broken an extractor yet.





+ 100

Well Said

Most Mausers have been modded to close over the round.

A badly set up Mauser 98 Magazine WILL pop cartridges out
before the bolt grabs hold of them.

And I agree, who loads upside down !!!

My Win Mod 70 Push Feed 30.06 functions flawlessly, whatever I do to it.





Edited by 500Nitro (10/06/13 08:42 AM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
tinker
.416 member


Reged: 12/03/05
Posts: 4835
Loc: Nevada
Re: Push Feed vs CRF..which is more reliable.. [Re: 500Nitro]
      #231040 - 10/06/13 09:45 AM

For whatever it's worth, I've hung from a tree limb from my knees upside down and fired through a magazine with my Whitworth 458 - just to know I could.



Cheers
Tinker

--------------------
--Self-Appointed Colonel, DRSS--



"It IS a dangerous game, and so named for a reason, and you can't play from the keyboard. " --Some Old Texan...


Post Extras: Print Post   Remind Me!   Notify Moderator  
tophet1
.400 member


Reged: 15/09/07
Posts: 1873
Loc: NSW, Australia
Re: Push Feed vs CRF..which is more reliable.. [Re: tinker]
      #231041 - 10/06/13 10:54 AM

Yes, its an old argument.

Tentman has it exactly right. It was designed for soldiers in the heat of battle so they couldn't stuff it up in extreme conditions. 500Nitro is also on the money when he says most Mauser '98's have been modified, to such an extent that the true CRF features are nullified.

The 6mm sounds like a simple re-barrel and not properly checked by a knowledgeable gunsmith. If it popped rounds then it should not have left the shop.

As a hunting rifle the Mauser brings one more aspect of reliability to the argument that many push feeds and modern Mauser '98 clones don't have. Slop in the bolt to eliminate jamming from ingress of debris. This only becomes apparent if you are hunting in really harsh terrain.

I only realised the importance of this after experiencing action clogging myself, from a severe dust storm. My CZ550 .308 became hard to cycle (due to its closer tolerances) and had to be wiped out. My son's .243 Parker Hale Mauser '98 kept working.

Reliability ? ex-mil Mauser '98 all the way for me, but not just because of CRF.


Post Extras: Print Post   Remind Me!   Notify Moderator  
500Nitro
.450 member


Reged: 06/01/03
Posts: 7244
Loc: Victoria, Australia
Re: Push Feed vs CRF..which is more reliable.. [Re: tophet1]
      #231044 - 10/06/13 05:10 PM


tophet

Yes, that point re Mauser 98's is a good one.

Also agree that the gun was not checked by a gunsmith
as it should have been.


Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 26413
Loc: Beautiful British Columbia, Ca...
Re: Push Feed vs CRF..which is more reliable.. [Re: 500Nitro]
      #231060 - 11/06/13 01:13 AM

Good points all. I've merely used Mauser actions on my rifles because they are - or used to be cheaper to obtain & I was told by the 'old guys' that Mausers had terrific gas handling properties in the event of a 'problem', not because they were of one feeding design or another.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
bonanza
.400 member


Reged: 17/05/04
Posts: 2335
Loc: South Carolina
Re: Push Feed vs CRF..which is more reliable.. [Re: DarylS]
      #231062 - 11/06/13 02:06 AM

I think the CRF is overly played, but one cannot deny the mauser claw extractor is the best on any firearm.

--------------------


"Speak Precisely" G. Gordon Liddy.

"Life is absurd, chaotic and we must define its purpose with our actions" Abert Camus

"I''m the dude playing a dude disguised as another dude."

"Yo! Mr. White"


Post Extras: Print Post   Remind Me!   Notify Moderator  
500Nitro
.450 member


Reged: 06/01/03
Posts: 7244
Loc: Victoria, Australia
Re: Push Feed vs CRF..which is more reliable.. [Re: bonanza]
      #231063 - 11/06/13 02:07 AM


Daryl

Agree. Mauser gas removal system down the
mag well is very good.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Tentman
.300 member


Reged: 13/06/10
Posts: 128
Loc: Southland, New Zealand
Re: Push Feed vs CRF..which is more reliable.. [Re: bonanza]
      #231076 - 11/06/13 11:40 AM

The trouble with the claw extractor is there is the Mauser and Brno claw then the rest. All of the clones including the BAS and Win Model 70 lack the dovetail that locks the extractor to the bolt body. When "in extremis" extraction is required they will pull over the rim - don't ask how I learnt this, very embarrassing and spoils your entire day. Needless to say I let my pre64 and BSA Hunter go, dammed shame.

--------------------
Southland, New Zealand

Edited by Tentman (11/06/13 11:45 AM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
Marrakai
.416 member


Reged: 09/01/03
Posts: 3475
Loc: Darwin, Top End of Australia
Re: Push Feed vs CRF..which is more reliable.. [Re: tinker]
      #231421 - 21/06/13 12:45 PM

Quote:

I've hung from a tree limb from my knees upside down and fired




Hey Tink:
I reckon all the guys on here could probably toss in a few bucks and buy you a tree-stand for Christmas.
That should improve your blood-pressure, at least.....



How far did the "human pendulum" swing after firing the .458, BTW?


Sorry, couldn't resist. Its such a silly argument anyway. Shame on you, Ripp!

--------------------
Marrakai
When the bull drops, the bullshit stops!
--------------------------------
www.marrakai-adventure.com.au


Post Extras: Print Post   Remind Me!   Notify Moderator  
rigbymauser
.400 member


Reged: 15/05/05
Posts: 1970
Loc: Denmark
Re: Push Feed vs CRF..which is more reliable.. [Re: Marrakai]
      #231473 - 23/06/13 01:44 AM

70% of my guns I have in my safe are all CRF guns. 10% are PF and the last 20% are backaction Jones underlever doubles. The 1(10%) PF I have is a Weatherby Mk V works very well.

Post Extras: Print Post   Remind Me!   Notify Moderator  
tinker
.416 member


Reged: 12/03/05
Posts: 4835
Loc: Nevada
Re: Push Feed vs CRF..which is more reliable.. [Re: Marrakai]
      #231489 - 23/06/13 10:13 AM

Marrakai

No swing to speak of at all - and I have no plans to repeat the stunt. It was fun for what it was, and at least I can say 'I've been there..."

On the tree-stand offer, I will gladly accept!
I think first we'll need to install a fitting tree somewhere in this high-desert setting. Perhaps something up on the rim rock in the canyon out back.







Cheers
Tinker

--------------------
--Self-Appointed Colonel, DRSS--



"It IS a dangerous game, and so named for a reason, and you can't play from the keyboard. " --Some Old Texan...


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
0 registered and 16 anonymous users are browsing this forum.

Moderator:   

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 3685

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved