Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: .300 H&H loads

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Rifles

Pages: 1

sixshooter
.224 member

Reged: 10/01/07
Posts: 9
Loc: Alberta, Canada

.300 H&H loads
#172159 - 27/11/10 02:18 PM

I have a Browning Safari and looking for some load suggestion.

Post Extras:

szihn
.400 member

Reged: 24/06/07
Posts: 2110
Loc: Wind River Valley, Wyoming

Re: .300 H&H loads [Re: sixshooter]
#172160 - 27/11/10 03:24 PM

I used 70 grains of H4831 and a 220 grain bullet in mine.
I don't have it any more, and I am sorry I sold it.

Post Extras:

grandveneur
.400 member

Reged: 21/09/08
Posts: 1295
Loc: France / Germany

Re: .300 H&H loads [Re: sixshooter]
#172176 - 28/11/10 02:24 AM

24" / 12" barrel ( old german custom rifle US M17 action )

154grs/10g SF MEN ( 150grs Barnes X )
CCI250
70grs N160 or 71grs N560

168grs SP SIERRA, LAPUA, NORMA
CCI250
68grs TU 7000 ( or IMR4350 )

220grs RN Hornady
CCI250
64grs N160

( Bad accuracy at long range with the last one in my rifle ! )

Post Extras:

SharpsNitro
.375 member

Reged: 12/08/08
Posts: 729
Loc: Arizona, USA

Re: .300 H&H loads [Re: sixshooter]
#172180 - 28/11/10 03:14 AM

I've been using the loading data, such that it is, from the Hodgdon manual. The one I'm shooting now is:

Case: Norma
Primer: CCI LRM
Bullet: Sierra 200gr GK
Powder: Hodgdon 4831SC, 72gr

This is a max load in their book. So far, I've only put a few rounds through my rifle (pre-64 M70) with it but it looks to be an accurate load. I'm waiting for the weather to warm up a little to chronograph it.

Post Extras:

rigbymauser
.400 member

Reged: 15/05/05
Posts: 1970
Loc: Denmark

Re: .300 H&H loads [Re: SharpsNitro]
#172247 - 29/11/10 01:47 AM

My old "scotlandlandload" was 72grain Norma MRP...Winchester brass...Fed215 Primer....200grain nosler partition and later Accubond.

Post Extras:

Isopeura
.224 member

Reged: 01/06/08
Posts: 36
Loc: Finland

Re: .300 H&H loads [Re: rigbymauser]
#172281 - 29/11/10 08:32 AM

I use 180 A-Frame for moose and it's driven by a max load of H4831. Another favorite is a 200 gr Accubond and I use H4831 for it too. I say max load because there is a 3 gr difference in the usable max load between my two rifles of this caliber. Actually the other one thinks that Hodgdon's max load is a bit too stiff for it.

This cartridge is amazing as it seems to like also the H4350, Norma URP and similar powders usually found in .30-06 loads. So far I have achieved a bit better accuracy with these and also less muzzle blast. Since most of these loads can not be found in load data tables, I have to try out more combinations before I will make a more permanent shift to these powders.

Post Extras:

Pages: 1

Extra information

0 registered and 42 anonymous users are browsing this forum.

Moderator:

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 2746

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact