Home | Ezine | Forums | Links | Contact
NitroExpress.com: Copper caps as projectiles?

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Paradox and Bore Guns

Huvius
.416 member


Reged: 04/11/07
Posts: 3533
Loc: Colorado
Copper caps as projectiles?
      25/10/08 08:52 AM

Having read many threads here on home-made bullets and casting, I was wondering, has anybody here used copper pipe caps as projectiles?

I was thinking along these lines, and bought a couple - 1/2" and 3/4".

The OD's are .706" and .968" respectively.
The 1/2" cap slides right through the muzzle on my Thomas Jackson 12ga. with no extra room and stops about 3mm short in the choke of my Tolley 12ga.

I think these can be reformed up or down as well as punching over a mandrel or die to round out the nose.
I filled the 1/2" cap with lead to weigh, but my scale maxes out at 515gr. I torched it too prior to filling thus the discoloration, but I bet the molten lead would anneal it anyway.
It does fit nicely in a 10ga. shot cup though!

Has anyone tried this?







--------------------
He who lives in the past is doomed to enjoy it.

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Copper caps as projectiles? Huvius 25/10/08 08:52 AM
. * * Re: Copper caps as projectiles? 500Nitro   25/10/08 09:06 AM
. * * Re: Copper caps as projectiles? Huvius   25/10/08 11:06 AM

Extra information
0 registered and 21 anonymous users are browsing this forum.

Moderator:  tinker 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 3364

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved